SUPPORT DISCUSSIONS

1669 Views
19 Replies
LAST POST: May 10, 2012 8:18 AM by SportySpider1

I have just got the Speed_cell and I have matched with my phone but when I press sync I am getting this:

 

There has been a problem connecting to your micoach Speed_cell. This could happen if the miCoach SPEED_CELL is too far from the device or your battery is empty. Please try again.

 

It should be neither but how can I tell if the battery on the cell is already dead?

  • |
    • My experience is that it is just broken, either the sensor or the app. Hard to tell which. I have replaced the battery but that does not help. I have gotten it to connect a few times. Most of those times it failed to find any data from the workout so it was all a waste of time.

        • Hi bl0ckev,

           

          Thanks for the post.

           

          Sorry for the unpleasant experience you're having with your SPEED_CELL.

           

          Can I ask you a question? Were you able to add your SPEED_CELL as a default device on the App?

           

          If you've added your SPEED_CELL as a default device but you can't sync your SPEED_CELL, please try the following steps:

           

          • Please make sure that the SPEED_CELL is within range (within 10 meters but not closer than 6 inches from the CONNECT for iPhone/iPod) and that the SPEED_CELL is activated (shake it for few seconds as it can be activated by movement).
          • Remove the CONNECT and plug it in again and try synching.
          • Close down the App completely (close the App and double click iPhone home button and hold on the App icon. Once it starts shaking and "-"sign appears, click "-" to close it completely). Open the App again and try synching.
          • Reboot/restart your phone and try synching.
          • Go to Settings> Manage device> add device. Select your SPEED_CELL and go to edit > remove device. After removing the device, add it again and try synching.

           

          Hope this helps.

           

          Thanks,

          SportySpider1

          Your miCoach Team

            • Hi bl0ckev,

               

              thanks for posting.

               

              It is not possible to sync first with the iPhone and then to the PC since once you have retrieved the data from the SPEED_CELL you cannot retrieve it again.

               

              However, you can sync from the App to the website, to do it, just launch the App, tap into the miCoach menu and then you will see a miCoach symbol. Just tap on it:

               

              apppic.PNG

               

              Then you will be able to see your stats in your website account. If you have further questions, just let us know.

               

              MissTennis1

              Your miCoach Team

            • Glad to hear you got it working. What did the trick? Does it connect every time?

                • Yes I agree there is no indication that it is working.  Several times now I have played two sets of tennis only to find that "No workouts were found" when I synced to my iphone.I wonder if the sync to computer hardware is more reliable?

                  • Hi Markcc,

                     

                    thanks for posting. It is difficult to tell in here as not all the miCoach users encounter the same issue. In your case I would recommend you to contact our Support Team (support@micoach.com) so they can give you further assistance on this. When you do it please let them know your issue and if you have tried some steps to fix it. Also let them know which Apps have you tried and the generation and iOS of your iPhone/iPod. One of our agents will contact you soon.

                     

                    Regards,

                     

                    MissTennis1

                    Your miCoach Team

  • I'm experiencing the same problem as you did bl0ckev. I followed the steps i got from the mail from technical support.When i removed the Speed_Cell it wouldn't be found again. Haha what a great start with this. Just hoping it will come back to life and work properly so i can see my football stats!!

     

    Regards

    Brage.

    • Haha fair enough but you dont need your phone in your pocket while you play? It's saved on a memory chip inside the Speed_Cell and when you syncronize that information is transfered to the iphone.

      Well a run sounds nice you better enjoy that MiCoach since i can't test mine yet!!

        • It said it knows when to start when you have the Speed_cell in motion or something. Gues that's how it knows to start but i read also it doesnt record for that long so it's a limit when to stop and i asume it kinda understands when the practise is finished when the boots are still for a period of time..

        • Hi bl0ckev,

           

          Thanks for the post.

           

          The miCoach SPEED_CELL is generally in a standby mode and will be activated by movement.

           

          As a rule you must travel at least 80 meters in a 60 second period somewhere in the workout for it to be considered valid data.  This is the 80/60 rule.  Some test workouts where people are just taking a few steps around and not fulfilling this rule will therefore not be recognized nor synced.

           

          The SPEED_CELL gets inactive 2hours after activated, however it will turn right back on if the activity is still in progress without missing a data point.

           

          Hope I was able to answer your question.

           

          Thanks,

          SportySpider1

          Your miCoach Team

            • Hi bl0ckev,

               

              In the football App, yellow and red zones (pacebased) set in your miCoach web account are considered as a sprint.

              This is because 'accelerating' into yellow is a 'sprinting' effort even though you may not get to red due to a change in direction common in a game situation.

               

              Be assured that miCoach only counts the # of times you cross the yellow as a sprints, not the time spent.

               

              I understand that this can be tricky as the SPEED_CELL doesn't have switch to turn it on or off.  It's hard to say if the SPEED_CELL recognizes it as two different sets of data or as one, if you keep working out after two hours. I'll check this with our developers and get back to you as soon as I get information from them.

               

              Thanks,

              SportySpider1

              Your miCoach Team

Loading results
Close

More Like This

  • Retrieving data ...
Find miCoach support on: