SUPPORT DISCUSSIONS

1710 Views
10 Replies
LAST POST: Aug 3, 2012 5:29 PM by Hernandez67

For a second time now, after several months of use, my Iphone 4s no longer sees the Connect device (The icon stays red in the lower left corner). Previously it was an issue with my older phone's port that may have had the slightest amount of dust/corrosion. Although all other devices I attach to the port were not a problem, it seems that the Connect device is highly sensitive and has no tollerance for the usual wear of a phone. The device worked fine on my new phone until now, where I have the same issue it would seem. Can another heart rate monitor device work with the MiCoach App, or must the Connect hardware be used no matter what, if I want to monitor via heart rate and not pace?

 

Thanks,

M

  • |
  • Hi msc00,

     

    Thanks for posting.

     

    Only miCoach sensors are compatible with the App and the CONNECT. For that reason, I would kindly ask you to contact our Support Team. When you do it, please let them know what is the issue with your CONNECT and please send a screenshot where the App shows the icon in red. Finally, include this code at the top of your message: "SCM - your miCoach screen name - Forum". You will be contacted soon.

     

    Thanks a lot for your cooperation.

     

    MissTennis1

    Your miCoach Team

    • Any ANT+ HRM or stride sensor should work with the app.  The adidas sensors are ANT+ and therefore must comply to the standard. My Garmin sensors work fine with iPhone and adidas connect.

       

      You do need to use the adidas connect dongle with the app however.  Wahoo, Garmin dongles etc. won't work, as far as I'm aware.

      • Hi msc00,

         

        Thanks for the update and sorry for the delay in my response.

         

        I've checked with our support team and could see that the reply mail was sent to you one day after (22.07) you've contacted them.

         

        Have you checked your spam folder as well?

         

        Our support agent has just sent you the reply mail again in case you couldn't receive it . So please check your email account as well as spam folder.

         

        Please let me know if you could receive their mail this time.

         

        Thanks,

        SportySpider1

        Your miCoach Team

  • Hi MSC. I also use micoach mobile for iPhone 4S and regret to say my problem is quite similar! My connect+HRM its not longer recognized by the mobile, the red icon always is on and a msg : "device not compatible with iPhone" displayed immy i set the connect device on the mobile. I tried everything from remove sensor battery for 24 hrs, replace battery, reload miCoach app, reload iPhone iOS, went to a service shop to review my iPhone contact pins, to get connect + HRM exchanged at Adidas shop. Weird thing its that connect its recognized in other iPhone 4S using same iOS than mine! Customer Service transfer my case to Tech Service but no reply yet. Appreciate you let me know what they advise you to do. BR, Carlos.

      • Thanks M for your kind reply. Lucky you could solve your problem. Where did you get the port extender? Lastly but not less important, would like your authorization to address your answer to Tech Department (I use spanish website). BR, Carlos

Loading results
Close

More Like This

  • Retrieving data ...
Find miCoach support on: